SAFETY

ROLLASHIELD F FIRE SHUTTERS & CURTAINS

APPLICATIONS

Factory Dividing Walls

Flammable Stores

Canteens

Escape Routes

Laboratories

ROLLASHIELD FD

This is a heavy-duty fire shutter, the ideal choice for applications such as warehouses where maximum resistance is required. Rollashield FD is constructed from 75mm curved steel lath and is available in galvanised or a wide range of powdercoat colours. It can be manufactured to large sizes, tested up to 7000mm x 7000mm.

This fire shutter is equipped with a conventional fire door motor which can be either single or three phase and is available with a range of controls and methods of emergency operation, including fusible link, solenoid release and audio-visual door closing units. Rollashield FD has been successfully tested to provide 1, 2 or 4 hours of fire-integrity.

ROLLASHIELD FS

Rollashield FS is a neat, compact, tubular motor fire shutter, making it the ultimate choice for commercial applications such as receptions and serveries. The shutters are constructed from 50mm flat steel or 75mm curved steel lath and are available in either galvanised or a wide range of powdercoat colours. They are also available with a large choice of controls and methods of emergency operation, including fusible link or fire alarm interface, audio-visual door closing unit and UPS battery back-up.

The FS has been successfully tested to provide either 1 or 2 hours of fire integrity. Rollashield FS is reliable, tried and tested fire shutter which also looks good and operates safely.

ROLLASHIELD FD100

Rollashield FD100 is designed to offer a high quality, strong and efficient fire-protection solution with thermal and radiant heat performance. The roller shutter is constructed with a double-walled steel profile which is filled with insulation to provide thermal performance as well as fire-resistance.

ROLLASHIELD FD1000

Rollashield FD1000 is a high-performance insulated fire shutter performing to EN1634-1 to provide both fire integrity and insulation (EI60). Fire insulation is important in areas where there is an escape route past the door or high value or flammable stock are close by. The product is constructed with a double-walled insulated slat which provides thermal insulation.

ROLLASHIELD FC

Rollashield FC fire and smoke curtains offer up to 4 hours fire integrity for internal applications where security is not required. The curtains are constructed from fire rated fabric and can be manufactured to very large widths. The surrounds are very compact and can be powder coated or in galvanized or stainless steel finish. Fire curtains can be fitted with group-control units, controlled descent or staged closing mechanism and emergency retract push buttons. Smoke-seals are available if required to meet regulations.

ENQUIRE ABOUT THIS PRODUCT

Phone:

0330 7000 333

TektaHealth Email Newsletter


46 Aston Road, Waterlooville, Hampshire, PO7 7XJ

Tel: 0330 7000 333 | [email protected]

© 2018 Tekta. All rights reserved.

Tekta is a trading name of Armashield Limited

Company Registration No. 9162989 | VAT No. 760 1021 83